Copper Mountain Technologies S2 Series - Sour:aux:freq:star

S2VNA and S4VNA SCPI Programming Manual
349
SOUR:AUX:FREQ:STAR
SOURce <Ch> :AUXiliary:FREQuency:STARt <numeric>
SOURce <Ch> :AUXiliary:FREQuency:STARt?
Description
Sets or reads out the start of the frequency range of the auxiliary
RF source (4-port VNA only). When set the multiplier and offset
values are automatically corrected.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> start of the frequency range of the auxiliary RF source
within the VNA frequency range;
Unit
Hz
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
1 GHz
Related Commands
SOUR:AUX:FREQ:STOP
Equivalent Softkeys
Stimulus > Auxiliary Source > Start