Copper Mountain Technologies S2 Series - Calc:mark:X

S2VNA and S4VNA SCPI Programming Manual
136
CALC:MARK:X
CALCulate <Ch> [:SELected]:MARKer <Mk> :X <stimulus>
CALCulate <Ch> [:SELected]:MARKer <Mk> :X?
Description
Sets or reads out the stimulus value of the marker.
(command/query)
Target
Marker <Mk> of the active trace of channel <Ch>,
<Ch>={[1]|2|...16}
<Mk>={[1]|2|...16}
Parameter
<stimulus> the stimulus value of the marker, the range is from the
stimulus start value to the stimulus stop value currently set
Unit
{ Hz | s | dBm }
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
Stimulus center value
Equivalent Softkeys
Markers > Edit Stimulus