Copper Mountain Technologies S2 Series User Manual

S2VNA and S4VNA SCPI Programming Manual
296
SENS:CORR:OFFS:COLL:LOAD
SENSe <Ch> :CORRection:OFFSet:COLLect[:ACQuire]:LOAD <numeric1> , <numeric2>
Description
Measures the calibration data of the load standard of the specified
port when the frequency offset feature is on for scalar mixer
calibration.
(no query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric1> Measurement port number
<numeric2> Frequency port number.
Out of Range
If an incorrect port number is specified, an error occurs.
Notes
The command starts the measurement immediately if the trigger source
for calibration set to the "Internal" by the command
SENS:CORR:TRIG:FREE, otherwise waits for the trigger signal. The
command blocks the execution of the subsequent commands until the
completion of the measurement.
Equivalent Softkeys
Calibration > Mixer/Converter Calibration > Scalar Mixer Calibration >
Reflection Port n > Port n @Freq m Load

Copper Mountain Technologies S2 Series Specifications

General

Brand	Copper Mountain Technologies
Model	S2 Series
Category	Measuring Instruments
Language	English