Copper Mountain Technologies S2 Series - Sens:corr:coll:adap:wav:cut; Sens:corr:coll:meth:adap:rem

S2VNA and S4VNA SCPI Programming Manual
220
SENS:CORR:COLL:ADAP:WAV:CUT
SENSe <Ch> :CORRection:COLLect:ADAPter:WAVeguide:CUToff <numeric>
SENSe <Ch> :CORRection:COLLect:ADAPter:WAVeguide:CUToff?
Description
Sets or reads out the value of the cutoff frequency of the
waveguide adapter.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> the value of the cutoff frequency of the waveguide
adapter.
Query Response
<numeric>
Preset Value
1.0 GHz
Equivalent Softkeys
Calibration > Calibrate > Adapter Removal / Insertion> Cutoff Frequency
SENS:CORR:COLL:METH:ADAP:REM
SENSe <Ch> :CORRection:COLLect:METHod:ADAPter:REMoval <port>
Description
Selects the port number and sets the adapter removal/insertion
function for the calculation of the calibration coefficients when the
SENS:CORR:COLL:SAVE command has been executed .
(no query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<port> the number of the port from 1 to 2 (4 for S4VNA)
Related Commands
SENS:CORR:COLL:SAVE
Equivalent Softkeys
Calibration > Calibrate > Adapter Removal / Insertion> Select Port