Copper Mountain Technologies S2 Series - Calc:rlim:disp:val; Calc:rlim:fail

S2VNA and S4VNA SCPI Programming Manual
146
CALC:RLIM:DISP:VAL
CALCulate <Ch> [:SELected]:RLIMit:DISPlay:VALue <char>
CALCulate <Ch> [:SELected]:RLIMit:DISPlay:VALue?
Description
Selects the display type of the ripple value in the specified band.
(command/query)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<char> Specifies the math operation:
OFF : Ripple value display OFF
ABSolute : Absolute value
MARgin : Margin (difference between the ripple limit and the
absolute value)
Query Response
{OFF|ABS|MAR}
Preset Value
OFF
Equivalent Softkeys
Analysis > Ripple Limit > Ripple Value
CALC:RLIM:FAIL?
CALCulate <Ch> [:SELected]:RLIMit:FAIL?
Description
Reads out the ripple limit test result.
(query only)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Query Response
1 : Fail
0 : Pass
Equivalent Softkeys
None