S2VNA and S4VNA SCPI Programming Manual
SENS:CORR:COEF:METH:SHOR
SENSe
<Ch>
:CORRection:COEFficient:METHod[:RESPonse]:SHORt
<port>
Selects the port and sets the response calibration (Short) type, when
the written calibration coefficients are made effective by the
SENS:CORR:COEF:SAVE command.
(no query)
Channel <Ch>,
<Ch>={[1]|2|...16}
<port> the number of the port from 1 to 2 (or 4)
SENS:CORR:COEF:METH:SOLT1
SENSe
<Ch>
:CORRection:COEFficient:METHod:SOLT1
<port>
Selects the port and sets the full 1–port calibration type, when the
written calibration coefficients are made effective by the
SENS:CORR:COEF:SAVE command.
(no query)
Channel <Ch>,
<Ch>={[1]|2|...16}
<port> the number of the port from 1 to 2 (or 4)