Copper Mountain Technologies S2 Series - Sens:corr:coll:adap:med

S2VNA and S4VNA SCPI Programming Manual
218
SENS:CORR:COLL:ADAP:MED
SENSe <Ch> :CORRection:COLLect:ADAPter:MEDia {COAXial|WAVeguide}
SENSe <Ch> :CORRection:COLLect:ADAPter:MEDia?
Description
Specifies the adapter media in the adapter removal/insertion
function.
(command/query)
Target
The active trace of channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
COAXial : Specifies the coaxial adapter
WAVeguide : Specifies the waveguide adapter
Query Response
{COAX|WAV}
Preset Value
COAXial
Note
When the waveguide adapter is used it is recommended to specify the
adapter length instead of delay.
Equivalent Softkeys
Calibration > Calibrate > Adapter Removal / Insertion > Adapter Media