Copper Mountain Technologies S2 Series - Trig:scop

S2VNA and S4VNA SCPI Programming Manual
406
TRIG:SCOP
TRIGger[:SEQuence]:SCOPe <char>
TRIGger[:SEQuence]:SCOPe?
Description
Sets or reads out the trigger scope. The trigger scope determines
the response on the trigger signal arrival: either starts a sweep of
all waiting channels in turn or starts a sweep in the active channel
only.
(command/query)
Parameter
<char> Choose from:
ALL : All channels
ACTive : Active channel
Query Response
{ALL|ACT}
Preset Value
ALL
Related Commands
TRIG
TRIG:SING
*TRG
Equivalent Softkeys
Stimulus > Trigger > Trigger Scope > { All Channels | Active Channel }