Copper Mountain Technologies S2 Series - Sour:pow:slop

S2VNA and S4VNA SCPI Programming Manual
361
SOUR:POW:SLOP
SOURce <Ch> :POWer[:LEVel]:SLOPe[:DATA] <numeric>
SOURce <Ch> :POWer[:LEVel]:SLOPe[:DATA]?
Description
Sets or reads out the power slope value for the frequency sweep
type.
(command/query)
Target
Channel <Ch>,
<Ch>={[1]|2|...16}
Parameter
<numeric> the power slope value from –2 to +2
Unit
dB/GHz (decibel/gigahertz)
Resolution
0.1
Out of Range
Sets the value of the limit, which is closer to the specified value.
Query Response
<numeric>
Preset Value
0
Equivalent Softkeys
Stimulus > Power > Slope