Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 3 AAA & RADIUS Protocol Configuration Commands
Huawei Technologies Proprietary
3-23
Second Auth IP =0.0.0.0 Port=1812 State=block
Second Acct IP =0.0.0.0 Port=1813 State=block
Auth Server Encryption Key= huawei
Acct Server Encryption Key= huawei
Accounting method = required
Accounting method = required
TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12
Permitted send realtime PKT failed counts =5
Quiet-interval(min) =5
Retry sending times of noresponse acct-stop-PKT =500
Username format =without-domain
Data flow unit =Byte
Packet unit =1
------------------------------------------------------------------
Total 1 RADIUS scheme(s). 1 listed
3.2.6 display radius statistics
Syntax
display radius statistics
View
Any view
Parameter
None
Description
Using display radius statistics command, you can view the statistics information of
RADIUS packet.
This command outputs the statistics information about the RADIUS packets. The
displayed packet information can help with RADIUS diagnosis and troubleshooting.
For the related command, see radius scheme.
Example
# Display the statistics information of RADIUS packets.
<Quidway> display radius statistics
state statistic(total=1048):
DEAD=1048 AuthProc=0 AuthSucc=0
AcctStart=0 RLTSend=0 RLTWait=0
AcctStop=0 OnLine=0 Stop=0
StateErr=0
To Next Page
Loading...
Need help?
General
