Command Manual - Security
Quidway S3500 Series Ethernet Switches Chapter 3 AAA & RADIUS Protocol Configuration Commands
Huawei Technologies Proprietary
3-24
Receive and Send packets statistic:
Send PKT total :0 Receive PKT total:0
RADIUS received packets statistic:
Code= 2,Num=0 ,Err=0
Code= 3,Num=0 ,Err=0
Code= 5,Num=0 ,Err=0
Code=11,Num=0 ,Err=0
Code=22,Num=0 ,Err=0
Running statistic:
RADIUS received messages statistic:
Normal auth request ,Num=0 ,Err=0 ,Succ=0
EAP auth request ,Num=0 ,Err=0 ,Succ=0
Account request ,Num=0 ,Err=0 ,Succ=0
Account off request ,Num=0 ,Err=0 ,Succ=0
Leaving request ,Num=0 ,Err=0 ,Succ=0
… (Omitted)
3.2.7 display stop-accounting-buffer
Syntax
display stop-accounting-buffer { radius-scheme radius-scheme-name | session-id
session-id | time-range start-time stop-time | user-name user-name }
View
Any view
Parameter
radius-scheme radius-scheme-name: Configures to display the saved stopping
accounting requests according to RADIUS server name. radius-scheme-name
specifies the RADIUS server name with a character string not exceeding 32 characters.
session-id session-id: Configures to display the saved stopping accounting requests
according to the session ID. session-id specifies the session ID with a character string
not exceeding 50 characters.
time-range start-time stop-time: Configures to display the saved stopping accounting
requests according to the saving time. start-time specifies the start time of the saving
time range and stop-time specifies the stop time of the saving time range. The time is
expressed in the format hh:mm:ss-yyyy/mm/dd. When this parameter is specified, all
the stopping accounting requests saved in the time range since start-time to stop-time
will be displayed.
To Next Page
Loading...
Need help?
General
