August, 2006 IMAGE TRANSFER UNIT
3-77
Reassembly of the Image Transfer Unit and Belt Cleaning Unit
1. Insert one sheet of A4/LT paper
[A] at the corner as shown.
NOTE: The paper protects the
corner seal [B] of the belt
cleaning unit.
2. Lower the belt unit [C] onto the
cleaning unit [D].
3. Push the belt unit and belt
cleaning unit together.
4. Connect the belt unit and belt
cleaning unit ( x1, x1).
B132R315.WMF
B132R316.WMF
[B]
To Next Page
Loading...
