LCT (B473), LCT ADAPTER (B699) August, 2006
1-56
LCT (B473): Paper size change from A4 to 81/2" x 11" (LT)
Important: Start the following procedure after the copier installation and LCT
installation are both completed. This is because to do the following procedure, the
copier main power must be turned ON.
1. Turn ON the copier main power.
2. Open the LCT top cover [A].
3. Hold down the LCT bottom plate function button [B] while covering the photo
sensor [C]. Do this until the bottom plate [D] reaches the bottom of the LCT.
To Next Page
Loading...
