Configure System Information
139
M4300 Series and M4300-96X Fully Managed Switches User Manual
View LLDP Remote Device Information
You can view information on remote devices connected to the port.
To view LLDP remote device information:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > LLDP > Remote Device Information.
6. Use Interface to select the local ports which can receive LLDP frames.
The following table describes the LLDP Remote Device Information fields.
Table 47. LLDP Remote Device Information
Field Description
Remote ID The remote ID.
Switch ID The switch component associated with the remote system.
Switch ID Subtype The source of the switch identifier.
Port ID The port component associated with the remote system.
Port ID Subtype The source of port identifier.
System Name The system name of the remote system.
System Description The description of the given port associated with the remote system.
Port Description The description of the given port associated with the remote system.
System Capabilities Supported The system capabilities of the remote system.
To Next Page
Loading...
