NETGEAR M4300 User Manual

Manage Device Security
539
M4300 Series and M4300-96X Fully Managed Switches User Manual
5. Select Security > Port Authentication > Advanced > Client Summary.
The following table describes the fields on the Client Summary page.
Control Traffic With MAC Filtering
You can configure MAC filters
Configure MAC Filtering
You can create MAC filters that limit the traffic allowed into and out of specified ports on the
system.
 To configure MAC filter settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
Table 196. Client Summary
Field Description
Port The port to be displayed.
User Name The user name representing the identity of the supplicant device.
Supplicant Mac Address The supplicant's device MAC address.
Session Time The time since the supplicant as logged in seconds.
Filter ID The policy filter ID assigned by the authenticator to the supplicant
device.
VLAN ID The VLAN ID assigned by the authenticator to the supplicant device.
VLAN Assigned The reason for the VLAN ID assigned by the authenticator to the
supplicant device.
Session Timeout The session time-out set by the RADIUS server to the supplicant
device.
Termination Action The termination action set by the RADIUS server to the supplicant
device.

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)