Monitor the System
644
M4300 Series and M4300-96X Fully Managed Switches User Manual
5. Select Monitoring > Mirroring > RSPAN VLAN.
The VLAN ID column lists all VLANs on the device.
6. Select the VLAN to use as the RSPAN VLAN.
7. In the Admin Mode
list, select to Enable or Disable RSPAN support on the corresponding
VLAN.
The default value is Disable.
8. Click the Apply
button.
Your settings are saved.
Configure an RSPAN Source Switch
To configure an RSPAN source switch:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Monitoring > Mirroring > RSP
AN Source Switch Configuration.
To Next Page
Loading...
