NETGEAR M4300 User Manual

Manage Device Security
552
M4300 Series and M4300-96X Fully Managed Switches User Manual
Configure the Private VLAN Port Mode
 To configure the private VLAN port mode:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security > T
raffic Control > Private VLAN > Private VLAN Port Mode
Configuration.
6. From the
Port Vlan Mode menu, select the private VLAN port mode:
• General. Sets port in General mode.
• Host. Sets port in Host mode. Used for private VLAN configuration.
• Promiscuous. Sets port in Promiscuous mode. Used for private VLAN configuration.
The factory default is General.
7. Click the Apply button.
Your settings are saved.
Configure a Private VLAN Host Interface
 To configure a private VLAN host interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)