NETGEAR M4300 - Configure the Syslog and Syslog Host Settings; Configure the Syslog Settings

Monitor the System
634
M4300 Series and M4300-96X Fully Managed Switches User Manual
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Monitoring > Logs > Console Log Configuration.
6. Select the Admin Status
Disable or Enable radio button.
A log that is disabled does not log messages.
7. Severity Filter.
A log records messages equal to or above a configured severity threshold.
Select the severity option by selecting the corresponding line on the drop-down entry field.
These severity levels are available:
• Emergency (0)
.
The system is unusable.
• Alert (1)
. Action must be taken immediately
.
• Critical (2). Critical conditions.
• Error (3). Error conditions.
• W
arning (4). W
arning conditions.
• Notice (5). Normal but significant conditions.
• Informational (6). Informational messages.
• Debug (7). Debug-level messages.
8. Click the Apply button.
Your settings are saved.
Configure the Syslog and Syslog Host Settings
You can let the switch filter the messages that are forwarded, based on severity and
generating component. You can also configure the syslog host settings.
Configure the Syslog Settings
 To configure the syslog settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.