Manage Device Security
584
M4300 Series and M4300-96X Fully Managed Switches User Manual
17. In the Max Output field, enter the number of octets the user is allowed to transmit.
After this limit is reached, the user is disconnected. 0 means use the global limit. The
range is 0 to 4294967295.
18. In the Max Total
field, enter the number of bytes the user is allowed to transmit and receive.
The maximum number of octets is the sum of octets transmitted and received. After this
limit is reached, the user is disconnected. 0 means use the global limit. The range is 0 to
4294967295.
19. Click the Add
button.
The user is added to the Local User database.
Configure the Captive Portal Trap Flag Settings
You can specify whether or not SNMP traps are sent from the captive portal and to specify
captive portal events that generate a trap. All CP SNMP traps are disabled be default.
To configure the captive portal trap flag settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security > Control > Captive Portal > CP T
rap Flags.
6. Select the CP T
rap Mode Disable or Enable radio button.
This sets the option to enable or disable the captive portal trap mode.
7. Select the Client Authentication Failure Disable or Enable
radio button.
To Next Page
Loading...
