Manage Device Security
545
M4300 Series and M4300-96X Fully Managed Switches User Manual
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security > Traffic Control > Port Security > Dynamic MAC
Address.
6. Select the Convert Dynamic Address to Static check box to convert a dynamically
learned MAC address to a statically locked address.
The dynamic MAC address entries are converted to static MAC address entries in a
numerically ascending order until the static limit is reached.
7. Click the Apply
button.
Your settings are saved.
8. From the Port List menu, select the physical interface.
The following table shows the MAC addresses and their associated VLANs learned on the
selected interface.
Configure Static MAC Addresses
To configure a static MAC address:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
Table 199. Dynamic MAC Address
Field Description
Number of Dynamic MAC
Addresses Learned
The number of dynamically learned MAC addresses on the interface.
VLAN ID The VLAN ID corresponding to the MAC address.
MAC Address The MAC addresses learned on a specific port.
To Next Page
Loading...
