Routing
332
M4300 Series and M4300-96X Fully Managed Switches User Manual
This field displays the default metric if one has already been set, or 0 if one was not
configured earlier. The valid values are 1 to 15.
12. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information that is displayed.
Configure Advanced RIP Interface Settings
To configure advanced RIP interface settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing > RIP >
Advanced > Interface Configuration
.
Table 119. RIP Advanced Configuration
Field Description
Global Route Changes The number of route changes made to the IP route database by RIP.
This does not include the refresh of a route's age.
Global Queries The number of responses sent to RIP queries from other systems.
To Next Page
Loading...
