NETGEAR M4300 User Manual

Configure System Information
100
M4300 Series and M4300-96X Fully Managed Switches User Manual
View DHCP Bindings Information
 To view the DHCP bindings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > Services > DHCP Server > DHCP Bindings Information.
6. T
o display DHCP Bindings Information, select one of the following radio buttons:
• All Dynamic Bindings. Specify all dynamic bindings to be deleted.
• Specific Dynamic Binding. Specify specific dynamic binding to be deleted.
DHCPACK The number of DHCPACK messages sent by the DHCP Server.
DHCPNAK The number of DHCPNAK messages sent by the DHCP Server.
Table 35. DHCP Server Statistics (continued)
Field Description

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)