NETGEAR M4300 User Manual

Manage Device Security
517
M4300 Series and M4300-96X Fully Managed Switches User Manual
The following table describes the nonconfigurable fields that display on the page.
Download Host Keys
You can download an SSH-1 RSA, SSH-2 RSA, or SSH-2 DSA key file from a remote system
to the device.
 To download host keys:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security >
Access > SSH > Host Keys Download.
6. In the
File Type list, select the type of file to transfer:
• SSH-1 RSA Key File
. SSH-1 Rivest-Shamir-Adelman (RSA) key file
• SSH-2 RSA Key PEM File. SSH-2 Rivest-Shamir-Adelman (RSA) key file (PEM
Encoded)
Table 192. RSA Key Management
Field Description
Keys Present Displays which of the following keys or both (if any) are present on the
device:
• SSH-1 Rivest-Shamir-Adelman (RSA) key file or SSH-2 RSA key
file (PEM Encoded)
• SSH-2 Digital Signature
Algorithm (DSA) key file (PEM Encoded)
Key Generation In Progress Displays which key is being generated (if any), RSA, DSA, or None.

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)