Manage Device Security
520
M4300 Series and M4300-96X Fully Managed Switches User Manual
Configure Inbound Telnet
You can regulate new inbound Telnet sessions. If Allow New Telnet Sessions is enabled,
new inbound Telnet sessions can be established until there are no more sessions available.
If Allow New Telnet Sessions is disabled, no new inbound Telnet sessions are established.
An established session remains active until the session is ended or an abnormal network
error ends the session.
To configure inbound Telnet:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security >
Access > T
elnet.
6. Next to Allow new telnet sessions, select the Disable
or Enable radio button.
This specifies whether the new inbound Telnet session is enabled or disabled. The
default value is Enabled so that new inbound T
elnet sessions can be established until
there are no more sessions available. If it is disabled, no new inbound Telnet sessions
To Next Page
Loading...
