Configure Quality of Service
472
M4300 Series and M4300-96X Fully Managed Switches User Manual
Configure a DiffServ Class
You can add a new DiffServ class name or rename or delete an existing class. You can also
define the criteria to associate with a DiffServ class. As packets are received, these DiffServ
classes are used to prioritize packets. You can use multiple match criteria in a class. The
logic is a Boolean logical-AND for this criteria. After creating a class, click the class link to the
Class page.
To configure a DiffServ class:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select QoS > DiffServ >
Advanced > Class Configuration
.
Policy table The number of configured policies out of the total allowed on the
switch.
Policy Instance table The number of configured policy class instances out of the total allowed
on the switch.
Policy Attributes table The number of configured policy attributes (attached to the policy class
instances) out of the total allowed on the switch.
Service table The number of configured services (attached to the policies on
specified interfaces) out of the total allowed on the switch.
Table 181. DiffServ Status (continued)
Field Description
To Next Page
Loading...
