NETGEAR M4300 - Page 473

Configure Quality of Service
473
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. To create a new class, enter a class name, select the class type, and click the Add button.
This field also lists all the existing DiffServ class names, from which one can be selected.
The switch supports only the Class Type
value All, which means all the various match
criteria defined for the class is satisfied for a packet match. All signifies the logical AND of
all the match criteria. You can select the class type only when you are creating a new
class. After the class is created, the Class Type field becomes nonconfigurable.
7. T
o rename an existing class, select the check box next to the configured class, update the
name.
8. Click the Apply
button.
Your settings are saved.
9. After creating a class, click the class name for an existing class.
The class name is a hyperlink.
The Class Configuration page displays, showing the configuration fields for the class.
10. T
o configure the class details, complete the fields:
• Class Name. The name for the configured Dif
fServ class.
• Class Type
. The DiffServ class type.