NETGEAR M4300 - Configure the DHCP Relay

Configure System Information
102
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. To display DHCP conflicts information, select one of the following radio buttons:
• All Address Conflicts
. Specify all address conflicts to be deleted.
• Specific Address Conflict
. Specify a specific dynamic binding to be deleted.
The following table describes the DHCP Conflicts Information fields.
Configure the DHCP Relay
 To configure DHCP relay:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > Services > DHCP Relay.
Table 37. DHCP Conflicts Information
Field Description
IP Address The IP address of the host as recorded on the DHCP server.
Hardware Address The client’s hardware address.
Detection Method The manner in which the IP address of the hosts were found on the
DHCP server
.
Detection T
ime The time when the conflict was detected in N days NNh:NNm:NNs
format with respect to the system up time.