Configure Switching Information
267
M4300 Series and M4300-96X Fully Managed Switches User Manual
View Port Transceiver Information
You can view the transceiver information for all fiber ports on the switch
To view port transceiver information:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Switching > Ports > Port T
ransceiver.
6. Select Unit ID
to display physical ports of the selected unit or select All to display physical
ports of all units.
7. To refresh the page with the latest information on the switch, click the Update
button.
The following describes the nonconfigurable information that is displayed.
Table 97. Port Transceiver
Field Description
Port The interface for which data is to be displayed.
Vendor Name Vendor name of the SFP.
Link Length 50 μm Link length supported for 50 μm fiber
.
Link Length 62, 5 μ
m Link length supported for 62, 5 μm fiber.
Serial Number Serial number of the SFP
.
Part Number Part number of the SFP.
Nominal Bit Rate Nominal signalling rate for SFP.
Revision Vendor revision of the SFP.
Compliance Compliance of the SFP.
To Next Page
Loading...
