NETGEAR M4300 - View the NSF Ospfv3 Summary

OSPF and OSPFv3
403
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. From the Source menu, select from the list of available source routes that were not
previously configured for redistribution by OSPFv3. The valid values are as follows:
• Connected
• Static
7. In the Redistribute Option list, select to Enable or Disable the redistribution for the
selected source protocol.
8. Set the Metric value to be used as the metric of redistributed routes.
This fields displays the metric if the source was preconfigured; otherwise, the tag is 0 and
can be modified.
The valid values are 0 to 16777214.
9. From the
Metric Type list, select the OSPFv3 metric type of redistributed routes.
10. Set the Tag field in routes redistributed.
This field displays the tag if the source was preconfigured; otherwise, the tag is 0 and can
be modified. The valid values are 0 to 4294967295.
1
1. Click the Apply button.
Your settings are saved.
View the NSF OSPFv3 Summary
You can view the NSF OSPFv3 summary. The allowable values for each field are displayed
next to the field. If any invalid values are entered, an alert message is displayed with the list
of all the valid values.
 To view the NSF OSPF summary:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.