Configure System Information
40
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. To refresh the page, click the Update button.
The following table describes the nonconfigurable Temperature Status information.
View the Device Status
This page shows the software version of each device.
To view the device status:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Management > System Information > Device Status.
Table 8. Temperature Status information
Field Description
Unit ID The unit number in the switch.
MAC-A The current temperature (in degrees Centigrade) of the MAC-A sensor
of the switch. The maximum is 31°C.
MAC-B The current temperature (in degrees Centigrade) of the MAC-B sensor
of the switch. The maximum is 37°C.
System The current temperature (in degrees Centigrade) of the System sensor
of the switch. The maximum is 31°C.
To Next Page
Loading...
