Monitor the System
631
M4300 Series and M4300-96X Fully Managed Switches User Manual
4. Click the Login button.
The System Information page displays.
5. Select Monitoring > Logs > Buffered Logs.
6. T
o clear the buffered log from the memory, click the Clear
button.
Configure the Buffered Log Settings
This log stores messages in memory based upon the settings for message component and
severity. On switch systems, this log exists only on the top of switch platform. Other platforms
in the switch forward their messages to the top of switch log.
To configure the buffered logs settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Monitoring > Logs > Buffered Logs.
To Next Page
Loading...
