NETGEAR M4300 - OUI-Based Port Settings

Configure Switching Information
200
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. In the VoIP VLAN ID field, type the VoIP VLAN ID of the switch.
There is no default VLAN for auto-VoIP, you must create a VLAN for it first.
7. In the OUI-based priority list, select the OUI-based priority of the switch.
The default value is 7.
8. Click the Apply button.
Your settings are saved.
OUI-Based Port Settings
 To configure auto-VoIP OUI-based port settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Switching >
Auto-V
oIP > OUI-based > Port Settings.
The Operational Status field displays the current operational status of each interface.