EasyManuals Logo

NETGEAR M4300 User Manual

NETGEAR M4300
704 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #424 background imageLoading...
Page #424 background image
Multicast Routing
424
M4300 Series and M4300-96X Fully Managed Switches User Manual
7. Select Enable or Disable from the Admin Mode list.
This sets the administrative status of IGMP proxy on the selected interface. The default is
Disable. Routing, IGMP and Multicast global admin modes must be enabled to enable
IGMP proxy interface mode.
8. In the Unsolicited Report Interval field, enter the unsolicited time interval value in seconds.
The unsolicited report interval is the time between repetitions of a host's initial report of
membership in a group. Valid values are from 1 to 260.
The default value is 1.
9. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information that is displayed.
View the IGMP Proxy Interface Statistics
To view the IGMP proxy interface statistics:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
Table 160. Multicast IGMP Proxy Interface Configuration
Field Description
IP Address The IP address of the IGMP proxy interface.
Subnet Mask The subnet mask for the IP address of the IGMP proxy interface.
Operational Mode The operational state of IGMP proxy interface.
Querier Address on Proxy
Interface
The querier address on the proxy interface.
Number of Groups The current number of multicast group entries for the IGMP proxy
interface in the cache table.
Version Enter the version of IGMP to configure on the selected interface. Valid
values are 1 to 3; the default value is 3.
This field is configurable only
when IGMP proxy Interface mode is enabled.
V
ersion 1 Querier Timeout The older IGMP version 1 querier time-out value in seconds. The older
version querier Interval is the time-out for transitioning a host back to
IGMPv3 mode, once an older version query is heard. When an older
version query is received, hosts set their older version querier present
timer to older version querier Interval.
Version 2 Querier Timeout The older IGMP version 2 querier time-out value in seconds.
Proxy Start Frequency The number of times the proxy was brought up.

Table of Contents

Other manuals for NETGEAR M4300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR M4300 and is the answer not in the manual?

NETGEAR M4300 Specifications

General IconGeneral
ModelM4300
Form FactorRack-Mountable
LayerLayer 3
StackableYes
ManagedYes
MemoryVaries by model
Flash MemoryVaries by model
WarrantyLifetime
PortsVaries by model (24 or 48 ports)
PoEAvailable on some models
Port Speed10/100/1000 Mbps, 10Gbps on uplinks
Forwarding RateVaries by model
Jumbo Frame SupportYes
VLAN SupportYes
Quality of Service (QoS)Yes
Security FeaturesACLs, 802.1X
DimensionsVaries by model
WeightVaries by model
Operating Temperature0° to 50° C (32° to 122° F)
Power SupplyInternal
Uplink PortsVaries by model (SFP/SFP+ or 10G SFP+)

Related product manuals