Monitor the System
643
M4300 Series and M4300-96X Fully Managed Switches User Manual
• Rx. Monitors received (ingress) packets only.
• Tx. Monitors transmitted (egress) packets only.
Note: For VLANs only, the
Tx and Rx and None options are applicable.
• Tx and Rx. Specify VLAN as the source VLAN.
• None. Remove the specified source VLAN.
If the VLAN is configured as the source VLAN, its direction is displayed as a blank
field.
9. Click the Apply button.
Your settings are saved.
The settings are applied to the system. If the port is configured as a source port, the
Mirroring Port field value is Mirrored.
The Status field indicates the interface status.
Note: If an error dialog includes multiple error messages, resolve the first
error messages to be able to view the remaining errors messages.
Manage an RSPAN VLAN
You can configure the VLAN to use the remote switched port analyzer (RSPAN) VLAN.
RSPAN allows you to mirror traffic from multiple source ports (or from all ports that are
members of a VLAN) from different network devices and send the mirrored traffic to a
destination port (a probe port connected to a network analyzer) on a remote device. The
mirrored traffic is tagged with the RSPAN VLAN ID and transmitted over trunk ports in the
RSPAN VLAN.
Configure an RSPAN VLAN
To configure an RSPAN VLAN:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
To Next Page
Loading...
