Maintenance and Troubleshooting
656
M4300 Series and M4300-96X Fully Managed Switches User Manual
Save the Configuration
When you save the configuration, changes that you made are retained by the switch when it
is rebooted. You can manually save the configuration or you can set up autosave.
To save the configuration:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Maintenance > Save Config > Save Configuration.
6. Select the check box.
7. Click the Apply button.
Your settings are saved.
If you restart the switch, the saved settings are retained.
Configure Auto Save Mode
To configure auto save mode:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
To Next Page
Loading...
