NETGEAR M4300 User Manual

Manage Device Security
507
M4300 Series and M4300-96X Fully Managed Switches User Manual
- RADIUS. The user's name and password are authenticated using the RADIUS server
instead of local server.
- TACACS.
The user's name and password are authenticated using the TACACS
server.
8. Click the Apply button.
Your settings are saved.
View Login Sessions
 To view login sessions:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security > Management Security > Login Sessions.
The following table describes the fields that are shown in the table.
Table 190. Login Sessions
Field Description
ID Identifies the ID of this row.
User Name The user's name whose session is open.
Connection From The machine from which the user is connected.
Idle Time The idle session time.
Session Time The total session time.
Session Type The type of session: Telnet, Serial, or SSH

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)