Manage Device Security
581
M4300 Series and M4300-96X Fully Managed Switches User Manual
The interfaces are selected.
9. Click the Apply button.
Your settings are saved.
View the Captive Portal Binding Table
To view the captive portal binding table:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security > Control > Captive Portal > CP Binding T
able
.
6. To refresh the page with the latest information on the switch, click the Update
button.
The following table describes the nonconfigurable information that is displayed.
Table 210. Captive Portal Binding Table
Field Description
Interface The interface.
CP ID The ID of the captive portal instance.
Operational Status Indicates whether the portal is active on the specified interface.
Block Status Indicates whether the captive portal is temporarily blocked for
authentication.
Authenticated Users Shows the number of authenticated users using the captive portal
instance on this interface.
To Next Page
Loading...
