Routing
339
M4300 Series and M4300-96X Fully Managed Switches User Manual
10. From the Mode menu, select the Active or Inactive mode for the new virtual router.
11. Click the Add button.
The virtual router is added to the switch configuration.
12. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information that is displayed.
Configure Advanced VRRP Settings
To configure the advanced VRRP global settings.
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing > VRRP >
Advanced > VRRP Configuration
.
Table 122. VRRP Global Configuration
Field Description
Interface IP Address Indicates the IP address associated with the selected interface.
State The current state of the virtual router. Possible values are as follows:
• Initialize
• Master
• Backup
To Next Page
Loading...
