Configure Switching Information
249
M4300 Series and M4300-96X Fully Managed Switches User Manual
4. Click the Login button.
The System Information page displays.
5. Select Switching> Multicast > MLD Snooping > Multicast Router VLAN Configuration.
6. From the Interface menu, select the interface for which you want to enable or disable the
multicast router configuration.
7. Use the VLAN ID field to specify the VLAN ID for which you want to enable or disable the
multicast router configuration.
8. Form the Multicast Router menu, select Enable or Disable.
9. Click the Apply button.
Your settings are saved.
Configure MLD Snooping Querier
You can configure the parameters for an MLD snooping querier. Only a user with read/write
access privileges can change the data on this page.
To configure an MLD snooping querier:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Switching> Multicast > MLD Snooping > Querier Configuration.
To Next Page
Loading...
