NETGEAR M4300 - View LLDP Statistics

Configure System Information
135
M4300 Series and M4300-96X Fully Managed Switches User Manual
5. Select System > LLDP > Interface Configuration.
6. Use Go To Port to enter the Port in unit/slot/port format and click the Go
button.
The entry corresponding to the specified Port, is selected.
7. Use Port to specify the list of ports on which LLDP - 802.1AB can be configured.
The Link Status field indicates whether the link is up or down.
8. Use T
ransmit to specify the LLDP - 802.1AB transmit mode for the selected interface.
9. Use Receive
to specify the LLDP - 802.1AB receive mode for the selected interface.
10. Use Notify to specify the LLDP - 802.1AB notification mode for the selected interface.
11. Optional TL
V(s):
• Use
Port Description to include port description TL
V in LLDP frames.
• Use System Name to include system name TL
V in LLDP frames.
• Use System Description to include system description TL
V in LLDP frames.
• Use System Capabilities to include system capability TL
V in LLDP frames.
12. Use Transmit Management Information to specify whether management address is
transmitted in LLDP frames for the selected interface.
13. Click the Apply
button.
Your settings are saved.
View LLDP Statistics
 To view LLDP statistics:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.