NETGEAR M4300 User Manual

Manage Device Security
503
M4300 Series and M4300-96X Fully Managed Switches User Manual
The options are as follows:
- Enable. The privileged EXEC password is used for authentication.
- Line
. The line password is used for authentication.
- None
. The user cannot be authenticated.
- RADIUS. The user's name and password are authenticated using the RADIUS server
instead of local server
.
- TACACS.
The user's name and password are authenticated using the TACACS
server.
- Deny. Authentication always fails.
8. Click the Add
button.
The login list is added to the switch.
Configure the Dot1x Authentication List
You can configure a dot1x list. A dot1x list specifies the authentication methods to validate
port access for the users associated with the list. Only one dot1x method can be supported.
The default list is dot1xList.
 To configure the dot1x authentication list:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security > Management Security >
Authentication List > Dot1x
Authentication
List.

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)