Configure System Information
110
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. Select the Admin mode Disable or Enable radio button.
This specifies whether the DHCPv6 Service administrative mode is enabled or disabled
The default value is Disable.
7. Use the DHCPv6 Server DUID field to specify the DHCP Unique Identifier (DUID) of the
DHCPv6 server.
8. Click the Apply
button.
Your settings are saved.
Configure the DHCPv6 Pool
You can view the currently configured DHCPv6 server pools as well as to add and remove
pools. A DHCPv6 server pool is a set of network configuration information available to
DHCPv6 clients that request the information.
To configure DHCPv6 pool settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > Services > DHCPv6 Server > DHCPv6 Pool Configuration.
To Next Page
Loading...
