EasyManua.ls Logo

NETGEAR M4300 - Configure the OSPF Virtual Link

NETGEAR M4300
704 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OSPF and OSPFv3
371
M4300 Series and M4300-96X Fully Managed Switches User Manual
The following table describes the nonconfigurable information that is displayed in the AS
Opaque Link State Database (LSDB) table.
Configure the OSPF Virtual Link
To configure the OSPF virtual link:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing > OSPF >
Advanced > V
irtual Link Configuration.
Table 135. OSPF AS Opaque Link State Database Table
Field Description
Router ID The 32-bit integer in dotted-decimal format that uniquely identifies the
router within the autonomous system (AS). The router ID is set on the
IP Configuration page.
To change the router ID you must first disable
OSPF. After you set the new router ID, you must reenable OSPF for the
change to take effect. The default value is 0.0.0.0, although this is not a
valid router ID.
LSA Type The format and function of the link state advertisement. LSA Type is
one of the following:
Area Opaque
AS Opaque
Link Opaque
LS ID The link state ID identifies the piece of the routing domain that is being
described by the advertisement.
The value of the LS ID depends on the
advertisement's LS type.
Age The time since the link state advertisement was first originated, in
seconds.
Sequence The sequence number field is a signed 32-bit integer
. It is used to
detect old and duplicate link state advertisements.
The larger the
sequence number
, the more recent the advertisement.
Checksum The checksum is used to detect data corruption of an advertisement.
This corruption can occur while an advertisement is being flooded, or
while it is being held in a router's memory
.
This field is the checksum of
the complete contents of the advertisement, except the LS age field.

Table of Contents

Other manuals for NETGEAR M4300

Related product manuals