Configure System Information
147
M4300 Series and M4300-96X Fully Managed Switches User Manual
View LLDP-MED Remote Device Inventory
To view LLDP-MED remote device inventory:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > LLDP > LLDP-MED > Remote Device Inventory.
The following table describes the LLDP-MED Remote Device Inventory fields.
Extended POE PD: Specifies if extended PD TLV is received in LLDP frame on this port.
Required The remote port's PD power requirement.
Source The remote port's PD power source.
Priority The remote port's PD power priority.
Table 51. LLDP-MED Remote Device Inventory
Field Definition
Port The list of all the ports on which LLDP-MED is enabled.
Management Address The advertised management address of the remote system.
MAC Address The MAC address associated with the remote system.
System Model Specifies model name of the remote device.
Software Revision Specifies Software version of the remote device.
Table 50. LLDP-MED Remote Device Information (continued)
Field Description
To Next Page
Loading...
