Multicast Routing
417
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. In the Admin Mode field, select the Enable or Disable option.
This sets the administrative status of IGMP in the router to active or inactive. The default
is Disable.
7. Click the Apply button.
Your settings are saved.
Configure the IGMP Routing Interface
To configure the IGMP routing interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select the Routing> Multicast > IGMP > Routing Interface Configuration.
6. Use one of the following methods to select an interface:
• In the Go T
o Interface field, enter the interface in the unit/slot/port format and click on
the
Go button.
• Next to the Interface column, select the check box for the interface that you want to
configure.
To Next Page
Loading...
