NETGEAR M4300 - Configure a Static MAC Address

Configure Switching Information
261
M4300 Series and M4300-96X Fully Managed Switches User Manual
4. Click the Login button.
The System Information page displays.
5. Select Switching > Address T
able> Advanced > Dynamic Addresses.
6. Use Address Aging T
imeout (seconds) to specify the time-out period in seconds for aging
out dynamically learned forwarding information.
IEEE 802.1D-1990 recommends a default of 300 seconds. The value can be specified as
any number between 10 and 1000000 seconds. The factory default is 300.
7. Click the Apply
button.
Your settings are saved.
Configure a Static MAC Address
 To configure a static MAC address:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Switching >
Address T
able> Advanced > Static MAC Address.
6. Use Interface to select the physical interface/LAGs.