Maintenance and Troubleshooting
662
M4300 Series and M4300-96X Fully Managed Switches User Manual
Upload a File from the Switch to a USB Device
To use upload a file from the switch to a USB device:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Maintenance > Export > USB File Export.
By default, the selection from the File T
ype menu is
Text Configuration. The stored
configuration that must be retrieved is in text mode.
6. In the File Path field, enter the path for the file to upload.
You can use up to 146 characters. The default is blank.
7. Use USB File to give a name along with path for the file to upload.
You can enter up to 32 characters. The factory default is blank.
8. Click the Apply button.
The file is uploaded.
Download or Import a File to the Switch
The switch supports system file downloads from a remote system to the switch by using
either TFTP or HTTP.
Download a File
For you to be able top download SSH key files, SSH must be administratively disabled and
no active SSH sessions must occur.
For you to be able to download SSL-related files, HTTPS must be administratively disabled.
To Next Page
Loading...
