NETGEAR M4300 User Manual

Configure System Information
152
M4300 Series and M4300-96X Fully Managed Switches User Manual
This enables or disables the sending of ISDP version 2 packets from the device. The
default value is Enabled.
10. Click the Apply button.
Your settings are saved.
The following table describes the ISDP Basic Global Configuration fields.
Configure ISDP Global Settings
 To configure ISDP global settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > ISDP >
Advanced > Global Configuration.
Table 54. ISDP Basic Global Configuration
Field Description
Neighbors table last time changed Specifies if
Device ID The device ID of this switch.
Device ID Format Capability The device ID format capability.
Device ID Format The device ID format.

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)