Configure Switching Information
248
M4300 Series and M4300-96X Fully Managed Switches User Manual
Enable or Disable a Multicast Router on an Interface
To enable or disable a multicast router on an interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Switching> Multicast > MLD Snooping > Multicast Router Configuration.
6. From the Interface menu, select the interface for which you want to enable or disable the
multicast router configuration.
7. From the Multicast Router menu, select Enable or Disable.
8. Click the Apply button.
Your settings are saved.
Configure Multicast Router VLAN Settings
To configure multicast router VLAN settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
To Next Page
Loading...
