NETGEAR M4300 - Configure Private Groups

Manage Device Security
546
M4300 Series and M4300-96X Fully Managed Switches User Manual
The login window opens.
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security > T
raffic Control > Port Security > Static MAC
Address.
6. From the Interface menu, select the physical interface.
7. In the Static MAC
Address
field, enter the MAC address that you want to add.
8. In the VLAN ID field, select the VLAN ID that corresponds to the MAC address that is being
added.
9. Click the Add button.
The static MAC address is added to the switch.
Configure Private Groups
 To configure a traffic control private group:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security > T
raffic Control > Private Group > Private Group Configuration.